Billet Aluminum Drive Sprockets (120s)

• Olson Brother's precision machined billet aluminum sprockets are ultra light while maintaining strength and long life.

• We start with light-weight, high-grade aluminum and machine each sprocket to perfection.

• While almost all our competitors have Chinese stamped sprockets that are typically warped and have non-chamfered teeth that break chain, our sprockets are machined from solid aluminum bar stock to make a perfect sprocket that runs completely true with no wobble and guides the chain onto the teeth without chain binding..

• For use on all 120cc sleds; #35 or #420/41 chain.

• Note: All of these sprockets require Olson Brother's billet aluminum sprocket hub.

Click Picture to Enlarge   

Aluminum Sprocket Hubs (120s)

• These light-weight hubs are an integral part of changing the gear ratios on your sled.

• Strong, durable, thoroughly tested and proven; there has never been a single failure of our hubs.

Click Picture to Enlarge   

Interchangeable Clutch Sprockets (120s)

• For use with Stinger & Titan drum clutches and Tomar disk Clutches.

• These versatile parts give you the flexibility to run either 35 or 420 chain and easily adjust gear ratios.

• Get the hole-shot and overall speed you desire by interchanging these clutch sprockets.

• Must be used with Titan, Stinger and Tomar clutches on most sleds.

Click Picture to Enlarge   

Deluxe Chain Tensioner

• This chain tensioner is 5" long, 2.2" wide, and 1.7" thick including the roller and bolt. The aluminum plate can be mounted anywhere on the tunnel you choose to place it and it mounted with either two 1/4" bolts or four 3/16" rivets, the choice is yours. Although sprockets are much cheaper to use, we have choosen to use a high quality roller that's 15/16" wide so it's very forgiving no matter where your chain is running and it's one less sprocket you have to shim to be in alignment with the clutch and driven sprockets. The roller has nearly 3" of travel to tension the chain to your preference and is very quickly adjusted.

Click Picture to Enlarge   

Deluxe Replacement Roller

• This is the roller used on the Deluxe Chain Tensioner. Although we've never had to sell a replacement yet, they are available if a roller ever wears out.

Click Picture to Enlarge   

Deluxe Roller Kit

• This kit allows a person who has the standard chain tensioner to upgrade to the deluxe model. The kit contains the roller, bushing, carriage bolt, washer and lock nut.

Click Picture to Enlarge   

Polaris Skid Wheel Kit

• This kit lifts the track away from the slide rails slightly to remove some friction and allows the track to spin more freely.
• These kits contains wheels and all mounting hardware.
• More than 80% of the friction comes from the front of the slide rail where most of the pressure is applied, and therefore we sell our kits with either two wheels for 1/2 the price or the full four wheel kit if you're racing grass drags or just want the extra support.

Click Picture to Enlarge   

Drive Chain (120s & Kitty Cats)

#420/41 GOLD RACE CHAIN

• Our gold chain is made from lightweight Chromalloy steel construction with seamless rollers and bushings, then heat treated to produce an even stronger chain. This is the strongest #420 chain on the market today with a wear index of 300 and tensile strength of 5000.

• Works great on all 120s, but a must have for the Arctic Cat Z-120 where chain heat from the exhaust is a major issue.

• Available by the length, which is a minimum of 4' (100 links) depending on what our distributor has available. The price remains the same for all lengths.

#420/41 STANDARD CHAIN

• Much stronger than OEM yet more affordable than our premium gold chain

  .

• Has a wear index of 100 and tensile strength of 3520.

      * Enter desired length in quantity field in shopping cart.

Click Picture to Enlarge    

    Related Items:

     Deluxe Chain Break Tool

Premium #35 Chain Break

• Small but Heavy Duty.

• For #35 chain.

Click Picture to Enlarge